From a56e75063e69c667ef7a8c0a36e0241e397367c7 Mon Sep 17 00:00:00 2001 From: Stavros Korokithakis Date: Tue, 17 Jan 2023 12:12:04 +0200 Subject: [PATCH] Updates --- content/ardupilot/installing-wtfos-on-dji.md | 5 +++-- content/drone-stuff/miscellaneous.md | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/content/ardupilot/installing-wtfos-on-dji.md b/content/ardupilot/installing-wtfos-on-dji.md index dc26502..8c15848 100644 --- a/content/ardupilot/installing-wtfos-on-dji.md +++ b/content/ardupilot/installing-wtfos-on-dji.md @@ -8,8 +8,9 @@ Here's the process to install it: * Make sure you're on version V01.00.0606 on whatever you want to root. * If you're rooting an AU or Vista, use a fan to cool it down during this process. * Go to [the WTFOS Configurator's Root section](https://fpv.wtf/root) and click "Root device". Click on your device on the permission popup and continue. Wait until done. DO NOT REBOOT WHEN IT'S DONE. +* Each step (there are five in total) should take around a minute to continue. If it takes longer, it's probably gone wrong, but it should be safe to just reboot the goggles/AU and try again. At least, it's never caused me a problem so far, and I've done it many times. * Once that's done, go to [the WTFOS Installer section](https://fpv.wtf/wtfos) and click "connect to device", and then "Install WTFOS". -* After that's done, and if you're upgrading the goggles, go to [the Package Manager section](https://fpv.wtf/packages), and install `fcc-unlock` (for full power) and `msp-osd`. You can also install `auto-record` on the goggles, for automatically recording if your video link goes away and comes back. The rest probably isn't necessary. +* After installation is done (or if you're upgrading), go to [the Package Manager section](https://fpv.wtf/packages), and install `fcc-unlock` (for full power) and `msp-osd`. You can also install `auto-record` on the goggles, for automatically recording if your video link goes away and comes back. The rest probably isn't necessary. ## On the goggles * Disable the custom OSD: Settings -> Display -> Custom OSD: Off. @@ -26,6 +27,6 @@ That's all! * * *

-Last updated on November 27, 2022. For any questions/feedback, +Last updated on January 16, 2023. For any questions/feedback, email me at hi@stavros.io.

diff --git a/content/drone-stuff/miscellaneous.md b/content/drone-stuff/miscellaneous.md index 7efc025..ce61bf0 100644 --- a/content/drone-stuff/miscellaneous.md +++ b/content/drone-stuff/miscellaneous.md @@ -44,10 +44,11 @@ If you have a BLHeli/BLHeli32 ESC, these settings are recommended: * Throttle cal enabled: Enabled * Non-damped mode: Enabled * Sine modulation mode: Enabled +* Brake on stop: 100% * * *

-Last updated on January 21, 2022. For any questions/feedback, +Last updated on January 17, 2023. For any questions/feedback, email me at hi@stavros.io.