From c4449d06076b055ce0cffc6545409e03b7b1f2c2 Mon Sep 17 00:00:00 2001 From: Stavros Korokithakis Date: Thu, 9 Sep 2021 00:52:09 +0300 Subject: [PATCH] Updates --- content/maker-things/battery-discharge-curves.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/content/maker-things/battery-discharge-curves.md b/content/maker-things/battery-discharge-curves.md index d4dcd7c..f7b5d44 100644 --- a/content/maker-things/battery-discharge-curves.md +++ b/content/maker-things/battery-discharge-curves.md @@ -4,7 +4,7 @@ weight = 1 sort_by = "weight" insert_anchor_links = "right" +++ -I wanted to buy some Sony VTC6 batteries, and I was wary of fakes, so I wrote a [battery discharge calculator](https://gitlab.com/stavros/battery-discharge-calculator/) with an associated hardware component (just a simple current and voltage sensor). I then took some measurements of my known-good batteries, and the new ones I bought. +I wanted to buy some Sony VTC6 batteries, and I was wary of fakes, so I wrote a [battery discharge calculator](https://gitlab.com/stavros/assault-and-battery/) with an associated hardware component (just a simple current and voltage sensor). I then took some measurements of my known-good batteries, and the new ones I bought. The methodology was the following: I connected the battery to the sensor, and the sensor to a configurable load. I set the load to draw a certain amount of amps until it reached a cutoff voltage, and then to stop. I then plotted mAh drawn versus voltage, as well as amps drawn. @@ -31,6 +31,6 @@ The performance falls off a cliff after around 3.6V, and it only outputs 1600 mA * * *

-Last updated on September 08, 2021. For any questions/feedback, +Last updated on September 09, 2021. For any questions/feedback, email me at hi@stavros.io.