From d3a551f7d251fdefa97e98e0aae855a3e2b1d70f Mon Sep 17 00:00:00 2001 From: Stavros Korokithakis Date: Mon, 4 Jan 2021 13:59:06 +0200 Subject: [PATCH] Updates --- content/drone-stuff/general-rc-tips.md | 5 +++- ...-on-a-no-name-frsky-compatible-receiver.md | 5 +++- ...bus-smartport-on-the-frsky-xsr-receiver.md | 5 +++- content/drone-stuff/inav-tuning-tips.md | 5 +++- .../drone-stuff/omnibus-f4-pro-servo-diode.md | 5 +++- content/drone-stuff/omnibus-f4-v3-pinout.md | 5 +++- .../transmitter-external-module-pinout.md | 5 +++- content/maker-things/electronics-tips.md | 5 +++- .../how-to-properly-level-your-3d-printer.md | 5 +++- ...uild-notes-for-the-ft-mighty-mini-arrow.md | 5 +++- .../mini-drak-build-condensed-instructions.md | 5 +++- content/software/_index.md | 11 ++++++++ .../monero-gui-syncing-stuck-with-ledger.md | 26 +++++++++++++++++++ content/welcome/stavros-notes.md | 5 +++- joplinexport.py | 5 +++- 15 files changed, 89 insertions(+), 13 deletions(-) create mode 100644 content/software/_index.md create mode 100644 content/software/monero-gui-syncing-stuck-with-ledger.md diff --git a/content/drone-stuff/general-rc-tips.md b/content/drone-stuff/general-rc-tips.md index b75a183..972d2de 100644 --- a/content/drone-stuff/general-rc-tips.md +++ b/content/drone-stuff/general-rc-tips.md @@ -10,4 +10,7 @@ These are general tips for building RC planes/quads/whatever: * * * -*Last updated on November 30, 2020.* +

+Last updated on November 30, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/drone-stuff/getting-uninverted-sbus-on-a-no-name-frsky-compatible-receiver.md b/content/drone-stuff/getting-uninverted-sbus-on-a-no-name-frsky-compatible-receiver.md index d963d2b..e920a2c 100644 --- a/content/drone-stuff/getting-uninverted-sbus-on-a-no-name-frsky-compatible-receiver.md +++ b/content/drone-stuff/getting-uninverted-sbus-on-a-no-name-frsky-compatible-receiver.md @@ -16,4 +16,7 @@ To break this out to the SBUS pad, I had to remove/bridge the resistor that is c * * * -*Last updated on November 24, 2020.* +

+Last updated on November 24, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/drone-stuff/getting-uninverted-sbus-smartport-on-the-frsky-xsr-receiver.md b/content/drone-stuff/getting-uninverted-sbus-smartport-on-the-frsky-xsr-receiver.md index f0c5236..3292f3c 100644 --- a/content/drone-stuff/getting-uninverted-sbus-smartport-on-the-frsky-xsr-receiver.md +++ b/content/drone-stuff/getting-uninverted-sbus-smartport-on-the-frsky-xsr-receiver.md @@ -19,4 +19,7 @@ On firmware 2.1.0 FPort, I actually got the uninverted FPort signal on the CPPM * * * -*Last updated on November 24, 2020.* +

+Last updated on November 24, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/drone-stuff/inav-tuning-tips.md b/content/drone-stuff/inav-tuning-tips.md index c972e52..64dcf55 100644 --- a/content/drone-stuff/inav-tuning-tips.md +++ b/content/drone-stuff/inav-tuning-tips.md @@ -33,4 +33,7 @@ Adding a piece of black, porous foam (so wind can pass through) over the baromet * * * -*Last updated on January 01, 2021.* +

+Last updated on January 01, 2021. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/drone-stuff/omnibus-f4-pro-servo-diode.md b/content/drone-stuff/omnibus-f4-pro-servo-diode.md index b7fa99c..0b3855e 100644 --- a/content/drone-stuff/omnibus-f4-pro-servo-diode.md +++ b/content/drone-stuff/omnibus-f4-pro-servo-diode.md @@ -12,4 +12,7 @@ Now the servos' 5V rail can be powered from another 5V supply to avoid servo cur * * * -*Last updated on November 24, 2020.* +

+Last updated on November 24, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/drone-stuff/omnibus-f4-v3-pinout.md b/content/drone-stuff/omnibus-f4-v3-pinout.md index dfca553..bf15014 100644 --- a/content/drone-stuff/omnibus-f4-v3-pinout.md +++ b/content/drone-stuff/omnibus-f4-v3-pinout.md @@ -10,4 +10,7 @@ This is the pinout of the Omnibus F4 V3: * * * -*Last updated on November 24, 2020.* +

+Last updated on November 24, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/drone-stuff/transmitter-external-module-pinout.md b/content/drone-stuff/transmitter-external-module-pinout.md index 09fa466..eef11c0 100644 --- a/content/drone-stuff/transmitter-external-module-pinout.md +++ b/content/drone-stuff/transmitter-external-module-pinout.md @@ -20,4 +20,7 @@ It's illustrated in this photo: * * * -*Last updated on November 24, 2020.* +

+Last updated on November 24, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/maker-things/electronics-tips.md b/content/maker-things/electronics-tips.md index 065cd8c..47cd5ef 100644 --- a/content/maker-things/electronics-tips.md +++ b/content/maker-things/electronics-tips.md @@ -45,4 +45,7 @@ There is more info on StackOverflow: [Selecting a switching transistor for a 5V * * * -*Last updated on December 13, 2020.* +

+Last updated on December 13, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/maker-things/how-to-properly-level-your-3d-printer.md b/content/maker-things/how-to-properly-level-your-3d-printer.md index d3b44da..521a11b 100644 --- a/content/maker-things/how-to-properly-level-your-3d-printer.md +++ b/content/maker-things/how-to-properly-level-your-3d-printer.md @@ -30,4 +30,7 @@ I hope this guide has helped you, feel free to share it with your friends. * * * -*Last updated on November 20, 2020.* +

+Last updated on November 20, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/model-build-notes/build-notes-for-the-ft-mighty-mini-arrow.md b/content/model-build-notes/build-notes-for-the-ft-mighty-mini-arrow.md index e63704b..2af6ae0 100644 --- a/content/model-build-notes/build-notes-for-the-ft-mighty-mini-arrow.md +++ b/content/model-build-notes/build-notes-for-the-ft-mighty-mini-arrow.md @@ -68,4 +68,7 @@ These notes are a condensed version of the [FT Arrow build video](https://www.yo * * * -*Last updated on November 27, 2020.* +

+Last updated on November 27, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/model-build-notes/mini-drak-build-condensed-instructions.md b/content/model-build-notes/mini-drak-build-condensed-instructions.md index a7d39b5..dd27e07 100644 --- a/content/model-build-notes/mini-drak-build-condensed-instructions.md +++ b/content/model-build-notes/mini-drak-build-condensed-instructions.md @@ -56,4 +56,7 @@ Notes: * * * -*Last updated on November 27, 2020.* +

+Last updated on November 27, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/software/_index.md b/content/software/_index.md new file mode 100644 index 0000000..04b6e4f --- /dev/null +++ b/content/software/_index.md @@ -0,0 +1,11 @@ ++++ +title = "Software" +weight = 5 +sort_by = "weight" +insert_anchor_links = "right" ++++ +## Contents + +Click on a link in the list below to go to that page: + +1. [Monero GUI syncing stuck with Ledger](../../software/monero-gui-syncing-stuck-with-ledger) diff --git a/content/software/monero-gui-syncing-stuck-with-ledger.md b/content/software/monero-gui-syncing-stuck-with-ledger.md new file mode 100644 index 0000000..f332e86 --- /dev/null +++ b/content/software/monero-gui-syncing-stuck-with-ledger.md @@ -0,0 +1,26 @@ ++++ +title = "Monero GUI syncing stuck with Ledger" +weight = 0 +sort_by = "weight" +insert_anchor_links = "right" ++++ +This is about the Monero desktop GUI, but probably also applies to Monerujo. + +If you're trying to sync the blockchain with your Ledger device, you might be getting the conflicting messages of "Waiting for daemon to sync" and "Daemon is synchronized", which then just stays there forever and doesn't move. + +You may see something like this in the log: +``` +ERROR wallet.wallet2 src/wallet/wallet2.cpp:3449 Error parsing blocks: Unable to send hidapi command. Error 128: Unknown error +ERROR wallet.wallet2 src/wallet/wallet2.cpp:3512 pull_blocks failed, try_count=3 +``` + +These errors are caused by the Ledger not being connected. You need to leave the Ledger connected throughout the syncing, as apparently the node needs some info from it and won't notify you if it's not there. It also doesn't seem to work if you disconnect and then connect the wallet afterwards. + +Letting the Ledger go to the screen saver or lock appears safe, at least with the Nano X I tried. Just leave it connected, and it'll sync fine. + +* * * + +

+Last updated on January 04, 2021. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/content/welcome/stavros-notes.md b/content/welcome/stavros-notes.md index 52a22e7..4abd8ff 100644 --- a/content/welcome/stavros-notes.md +++ b/content/welcome/stavros-notes.md @@ -18,4 +18,7 @@ Otherwise, enjoy my notes! * * * -*Last updated on November 20, 2020.* +

+Last updated on November 20, 2020. For any questions/feedback, +email me at hi@stavros.io. +

diff --git a/joplinexport.py b/joplinexport.py index e2741ae..8e11758 100755 --- a/joplinexport.py +++ b/joplinexport.py @@ -137,7 +137,10 @@ insert_anchor_links = "right" * * * -*Last updated on {note.updated_time:%B %d, %Y}.* +

+Last updated on {note.updated_time:%B %d, %Y}. For any questions/feedback, +email me at hi@stavros.io. +

""" )