Updates
This commit is contained in:
parent
813f4ee56e
commit
b626bfe2cc
@ -10,6 +10,15 @@ Here are some general INAV tuning tips and things I've learned throughout my bui
|
|||||||
* To make turns in automatic modes smoother, use `set nav_fw_control_smoothness = 8`.
|
* To make turns in automatic modes smoother, use `set nav_fw_control_smoothness = 8`.
|
||||||
* Pawel says that the idea of the software LPF is to replace the hardware LPF. Leave the hardware LPF set to 256 Hz and set the software LPF to 20-30 Hz, with a looptime of 1k.
|
* Pawel says that the idea of the software LPF is to replace the hardware LPF. Leave the hardware LPF set to 256 Hz and set the software LPF to 20-30 Hz, with a looptime of 1k.
|
||||||
|
|
||||||
|
|
||||||
|
## Battery monitoring
|
||||||
|
|
||||||
|
To monitor how much battery you have left in flight, voltage isn't a good indication because it can sag a lot. mAh is also not a good indication, because it doesn't decrease linearly with voltage. Energy is a better way, using the "Wh drawn" INAV OSD item. In addition, INAV has heat loss compensation for the energy meter, which gives you a more accurate reading.
|
||||||
|
|
||||||
|
To calculate the Wh a battery can give, the best way is to charge or discharge it and see how many Wh were spent, if your charger shows you. Another way is to get a rough estimate using the formula `no_cells * 3.7 * Ah`. So, for a 1800 4S battery, the maximum Watt-hours are `4 * 3.7 * 1.8 = 26.64 Wh`. **You should not discharge more than 80% of that value.**
|
||||||
|
|
||||||
|
For a 4S battery, I go with a rule of thumb: The maximum Wh is `mAh / 100`, so for a 5000 mAh battery I'll start to land after 50 Wh consumed, which is around 70% of the battery consumed and gives a nice margin for error.
|
||||||
|
|
||||||
* * *
|
* * *
|
||||||
|
|
||||||
*Last updated on December 15, 2020.*
|
*Last updated on December 20, 2020.*
|
||||||
|
Loading…
Reference in New Issue
Block a user