Updates

.pre-commit-config.yaml

@@ -4,17 +4,15 @@ repos:
   hooks:
   - id: black
 - repo: https://github.com/asottile/reorder_python_imports
-  rev: v3.9.0
+  rev: v3.12.0
   hooks:
   -   id: reorder-python-imports
-- repo: https://github.com/PyCQA/flake8
+- repo: https://github.com/charliermarsh/ruff-pre-commit
-  rev: '5.0.4'
+  rev: 'v0.1.6'
   hooks:
-  - id: flake8
+    - id: ruff
-    args: ["--max-line-length=1000"]
-    language_version: python3
 - repo: https://github.com/pycqa/pydocstyle
-  rev: 6.1.1
+  rev: 6.3.0
   hooks:
   - id: pydocstyle
     args:

content/SUMMARY.md

@@ -37,16 +37,20 @@
         - [🗈 Mini Drak build condensed instructions](model-build-notes/mini-drak-build-condensed-instructions.md)
 - [📁 Maker things](maker-things/index.md)
     - [🗈 Battery discharge curves](maker-things/battery-discharge-curves.md)
+    - [🗈 Details about my Sapphire Pro](maker-things/details-about-my-sapphire-pro.md)
     - [🗈 Electronics tips](maker-things/electronics-tips.md)
     - [🗈 GRBL_ESP32 tips](maker-things/grbl-esp32-tips.md)
     - [🗈 How to properly level your 3D printer](maker-things/how-to-properly-level-your-3d-printer.md)
+    - [🗈 Info on various hardware components](maker-things/info-on-various-hardware-components.md)
     - [🗈 Installing BLTouch-compatible firmware onto the TwoTrees Sapphire Pro](maker-things/installing-bltouch-compatible-firmware-onto-the-twotrees-sapphire-pro.md)
+    - [🗈 Notes on my TimSav](maker-things/notes-on-my-timsav.md)
 - [🖥️ Programming](programming/index.md)
     - [🗈 Interesting projects](programming/interesting-projects.md)
     - [🐍 Python](python/index.md)
         - [🗈 Decorator that runs a function in a thread](python/decorator-that-runs-a-function-in-a-thread.md)
 - [💽 Software](software/index.md)
     - [🗈 Black pills](software/black-pills.md)
+    - [🗈 Cloning cards/fobs with a Proxmark3](software/cloning-cards-fobs-with-a-proxmark3.md)
     - [🗈 Getting VoWiFi working on Xiaomi.eu](software/getting-vowifi-working-on-xiaomi-eu.md)
     - [🗈 Monero GUI syncing stuck with Ledger](software/monero-gui-syncing-stuck-with-ledger.md)
     - [🗈 Pairing the Xbox One controller in Linux](software/pairing-the-xbox-one-controller-in-linux.md)

content/ardupilot/transfer-config-between-craft.md

@@ -3,12 +3,7 @@
 This is the regex I use with Parachute to transfer between planes only the parameters that are transferrable (ie non-plane-specific):
 
 ```bash
-parachute restore -f "^(ACRO_LOCKING|OSD.*|RC[\d_]+.*|\
+parachute restore -f '^(ACRO_LOCKING|OSD.*|RC[\d_]+.*|FLTMODE.*|FLIGHT_OPTIONS|FS_.*|RTL_CLIMB_MIN|RTL_RADIUS|THR_PASS_STAB|THR_SLEWRATE|THR_SUPP_MAN|TKOFF_ACCEL_CNT|TKOFF_THR_.*|TKOFF_ALT|TKOFF_DIST|HOME_RESET_ALT|ALT_HOLD_RTL|MIN_GNDSPD_CM|ARMING_RUDDER)$' <backup>
-    FLTMODE.*|FLIGHT_OPTIONS|FS_.*|RTL_CLIMB_MIN|RTL_RADIUS|\
-    THR_PASS_STAB|THR_SLEWRATE|THR_SUPP_MAN|TKOFF_ACCEL_CNT|\
-    TKOFF_THR_.*|TKOFF_ALT|TKOFF_DIST|HOME_RESET_ALT|\
-    ALT_HOLD_RTL|MIN_GNDSPD_CM|ARMING_RUDDER)$" \
-    <backup>
 ```
 
 This will transfer things like the OSD settings, flight modes, failsafe options, etc etc, but will leave things like PID tuning alone.
@@ -17,6 +12,6 @@ Use it to set up a new plane by copying over settings from an older plane.
 * * *
 
 <p style="font-size:80%; font-style: italic">
-Last updated on August 07, 2022. For any questions/feedback,
+Last updated on September 16, 2023. For any questions/feedback,
 email me at <a href="mailto:hi@stavros.io">hi@stavros.io</a>.
 </p>

content/ardupilot/tuning-the-tecs.md

@@ -102,6 +102,6 @@ This is some more advanced information on tuning the TECS:
 * * *
 
 <p style="font-size:80%; font-style: italic">
-Last updated on March 23, 2022. For any questions/feedback,
+Last updated on November 26, 2023. For any questions/feedback,
 email me at <a href="mailto:hi@stavros.io">hi@stavros.io</a>.
 </p>

content/maker-things/details-about-my-sapphire-pro.md

@@ -0,0 +1,25 @@
+# Details about my Sapphire Pro
+
+My Sapphire Pro runs the MKS Robin Nano 1.2 board. Details on that board (pinouts, diagrams, etc) are here:
+
+[https://github.com/makerbase-mks/MKS-Robin-Nano-V1.X/wiki/Wiring_Pinout_and_Size](https://github.com/makerbase-mks/MKS-Robin-Nano-V1.X/wiki/Wiring_Pinout_and_Size
+)
+
+## TMC2209 drivers
+
+I've installed TMC2209 drivers and wired all their UARTs up to the same pin, PA13, as recommended [in this GitHub issue](https://github.com/Klipper3d/klipper/issues/4779). Their addresses for X, Y, Z, and E are 0, 1, 2, and 3, respectively. It doesn't work with Klipper, I'm only getting the error message `TMC stepper_x failed to init: Unable to read tmc uart 'stepper_x' register IFCNT`. Nothing I've tried has worked, the last resort is setting the baud rate to 19200. If you managed to make this work, please email me.
+
+## SFS 2.0 filament motion runout sensor
+
+I've installed the SFS 2.0 motion runout sensor on MT_DET1 and MT_DET2. This means that the motion sensor pin is PE6, and the switch sensor is PA4. That doesn't work either, Marlin keeps thinking the printer has run out of filament.
+
+Someone here had the same issue as me:
+
+[https://github.com/MarlinFirmware/Marlin/issues/26916](https://github.com/MarlinFirmware/Marlin/issues/26916)
+
+* * *
+
+<p style="font-size:80%; font-style: italic">
+Last updated on April 05, 2024. For any questions/feedback,
+email me at <a href="mailto:hi@stavros.io">hi@stavros.io</a>.
+</p>

content/maker-things/index.md

@@ -3,7 +3,10 @@
 Click on a link in the list below to go to that page:
 
 1. [Battery discharge curves](../../maker-things/battery-discharge-curves.html)
+1. [Details about my Sapphire Pro](../../maker-things/details-about-my-sapphire-pro.html)
 1. [Electronics tips](../../maker-things/electronics-tips.html)
 1. [GRBL_ESP32 tips](../../maker-things/grbl-esp32-tips.html)
 1. [How to properly level your 3D printer](../../maker-things/how-to-properly-level-your-3d-printer.html)
+1. [Info on various hardware components](../../maker-things/info-on-various-hardware-components.html)
 1. [Installing BLTouch-compatible firmware onto the TwoTrees Sapphire Pro](../../maker-things/installing-bltouch-compatible-firmware-onto-the-twotrees-sapphire-pro.html)
+1. [Notes on my TimSav](../../maker-things/notes-on-my-timsav.html)

content/maker-things/info-on-various-hardware-components.md

@@ -0,0 +1,31 @@
+# Info on various hardware components
+
+I bought various components from AliExpress, and sometimes they lack info. I've added info about them here:
+
+## USB-C decoy breakouts: [5V 9V 12V 15V 20V adjustable 3A PD/QC multi-protocol decoy fast charging boost module TYPE-C USB interface](https://www.aliexpress.com/item/1005006064674815.html)
+
+Specification:
+* Supports multiple fast charging protocols
+* Maximum support 3A
+* TYPE-C port power supply
+* Support multiple fast charging protocols: PD3.0/2.0, QC3.0/2.0, FCP, AFC
+* PD/QC multi-protocol decoy 5V, 9V, 12V, 15V, 20V voltage adjustable
+
+The manufacturer has said that this is the truth table:
+
+| 1 | 2 | 3 | Voltage |
+|---|---|---|---------|
+| L | L | H |       5 |
+| L | L | L |       9 |
+| L | H | L |      12 |
+| H | H | L |      15 |
+| H | L | L |      20 |
+
+This basically seems to be the same truth table as the original [USB PD decoy](https://hackaday.io/project/187112-usb-pd-decoy), except the logic levels are inverted (high becomes low and vice-versa), and SW1 in the original is M3, SW2 is M1, and SW3 is M2. Pretty convoluted, but it works.
+
+* * *
+
+<p style="font-size:80%; font-style: italic">
+Last updated on November 23, 2023. For any questions/feedback,
+email me at <a href="mailto:hi@stavros.io">hi@stavros.io</a>.
+</p>

content/maker-things/notes-on-my-timsav.md

@@ -0,0 +1,21 @@
+# Notes on my TimSav
+
+A few years ago I made a TimSav foam cutter CNC. These are my notes on it, because I keep forgetting things.
+
+* It runs [FluidNC](https://github.com/bdring/FluidNC).
+* `M3 S200` enables the spindle at 20%, `M3 S0`/`S0` disables it, `M5` halts it.
+
+To generate the Gcode, I use a program called [LaserWeb](https://laserweb.yurl.ch/). I have a few notes on it:
+
+* After you load an SVG, you need to click the leftmost button below the SVG, with the three cubes. This will select all the paths to generate movements for.
+* You need to click "Create single" to create a path to mill.
+* I use "Laser Cut" as the tool.
+
+I created a small script, `cnc_unwanted_moves`, to remove unwanted tool off/on at each corner. I won't share it here, as it's too specific to my configuration, and probably useless to anyone else.
+
+* * *
+
+<p style="font-size:80%; font-style: italic">
+Last updated on October 02, 2023. For any questions/feedback,
+email me at <a href="mailto:hi@stavros.io">hi@stavros.io</a>.
+</p>

content/software/cloning-cards-fobs-with-a-proxmark3.md

@@ -0,0 +1,74 @@
+# Cloning cards/fobs with a Proxmark3
+
+## Cloning a Paxton fob
+
+Basically, follow this guide:
+
+https://badcfe.org/how-to-paxton-with-proxmark/
+
+I managed to read my fob with:
+
+```
+lf hitag read --ht2 -k BDF5E846
+```
+
+If you're getting "Password failed!" or nothing back, move the fob around the 125KHz antenna (the top one), it should eventually work.
+
+Afterwards, [convert the fob pages to an EM4100 ID](https://static.badcfe.org/paxton-covert), and flash the ID to a T5577, emulating an EM4100 chip:
+
+```
+lf em 410x clone --id <your hex id>
+```
+
+Read it back to make sure:
+
+```
+lf em 410x reader
+```
+
+You should be done, but I haven't tested it as I don't have a Paxton reader handy.
+
+
+## Cloning MiFare cards
+
+See [Cloning a Mifare Classic 1K](https://www.gavinjl.me/proxmark-3-cloning-a-mifare-classic-1k/).
+
+
+## Card cloner password
+
+I have an AliExpress cloner which clones LF cards. Unfortunately, whenever it clones a card, it sets the password bit on it. This makes the card not respond to writes/wipes without the password (it just keeps having the same data, no matter what you write).
+
+To remove it with the Proxmark3, run:
+
+```
+lf t55 wipe -p 51243648
+```
+
+
+## Cloning T5577 cards
+
+Read the card with:
+
+```
+lf em 410x reader
+```
+
+Write with:
+
+```
+lf EM 410x clone --id <the ID from before>
+```
+
+
+## Related reading
+
+* [Iceman's Proxmark3 firmware (use this one)](https://github.com/RfidResearchGroup/proxmark3)
+* [How to copy Paxton fobs using an RFIDler](https://gist.github.com/natmchugh/18e82761dbce52fa284c87c190dc926f#getting-hold-of-hitag2-tags)
+* [ How to copy, read and write Paxton fobs and cards with a Proxmark ](https://badcfe.org/how-to-paxton-with-proxmark/)
+
+* * *
+
+<p style="font-size:80%; font-style: italic">
+Last updated on March 04, 2024. For any questions/feedback,
+email me at <a href="mailto:hi@stavros.io">hi@stavros.io</a>.
+</p>

content/software/index.md

@@ -3,6 +3,7 @@
 Click on a link in the list below to go to that page:
 
 1. [Black pills](../../software/black-pills.html)
+1. [Cloning cards/fobs with a Proxmark3](../../software/cloning-cards-fobs-with-a-proxmark3.html)
 1. [Getting VoWiFi working on Xiaomi.eu](../../software/getting-vowifi-working-on-xiaomi-eu.html)
 1. [Monero GUI syncing stuck with Ledger](../../software/monero-gui-syncing-stuck-with-ledger.html)
 1. [Pairing the Xbox One controller in Linux](../../software/pairing-the-xbox-one-controller-in-linux.html)