Updates

content/drone-stuff/transportable-c1-chaser.md

@@ -28,6 +28,14 @@ Also, leave the spar in the straws while glueing, so the straws don't lose their
 
 For glue, I use [E6000](https://www.banggood.com/ZHANLIDA-152550ml-E6000-B6000-Adhesive-Transparent-Glue-for-RC-Models-p-1604315.html?cur_warehouse=CN&ID=62834216283418&rmmds=search&custlinkid=667416&p=6W16207412782201611V) (sold as Goop in the US) for pretty much everything, but for this one you can use your favorite glue that you know won't dissolve EPO.
 
+This is what the final result will look like:
+
+
+
+[![](../../resources/6c9034ecf9d9414d87fbc6b4ec2fa28e.jpg)](../../resources/6c9034ecf9d9414d87fbc6b4ec2fa28e.jpg)
+
+
+
 
 ## Wings
 
@@ -41,12 +49,12 @@ The last part is securing the vertical stabilizers. I did this with two very sma
 First, press the stabilizer-side part (the Π-shaped one) onto the stabilizer on the place where you want it (I put it as shown in the photo), and cut slightly *inside* the indentation it creates.
 Then, glue it into place:
 
-[![stabilizer_tabs.jpg](../../resources/9e4279dbc32a4c28886b8dbb5e308f86.jpg)](../../resources/9e4279dbc32a4c28886b8dbb5e308f86.jpg)
+[![](../../resources/9e4279dbc32a4c28886b8dbb5e308f86.jpg)](../../resources/9e4279dbc32a4c28886b8dbb5e308f86.jpg)
 
 Then, insert the fuselage-side part (the inverted-T-shaped one) into the stabilizer-side part, align the stabilizer with the fuselage and press it in, to create the indentation onto the fuselage EPO, so you know where to cut.
 Insert the part into the cut and glue it in:
 
-[![fuselage_tabs.jpg](../../resources/ac25d2c2031441549f266d83ed6ac030.jpg)](../../resources/ac25d2c2031441549f266d83ed6ac030.jpg)
+[![](../../resources/ac25d2c2031441549f266d83ed6ac030.jpg)](../../resources/ac25d2c2031441549f266d83ed6ac030.jpg)
 
 When everything has set, you can install the stabilizers by simply slotting the two parts into each other and mounting the wing.
 That way, the stabilizer isn't going anywhere, and you can install and remove it very quickly.