joplin-mdbooks-website/content/software/getting-vowifi-working-on-xiaomi-eu.md
Stavros Korokithakis f77b0068fe
Updates
2022-07-23 19:07:51 +03:00

2.0 KiB

Getting VoWiFi working on Xiaomi.eu

I got a new Xiaomi phone (a Poco F4) and flashed it with Xiaomi.eu. Unfortunately, just like my Poco F3, Voice-over-WiFi wouldn't work. I had looked before, but I couldn't find anything, I assumed it was a problem with the phone. This time, I looked again, and found some posts hinting at it being a problem with the provisioning profile, and recommending using Qualcomm's QPST tool to load the MBN profile.

I tried that, but the profiles weren't there, or they wouldn't be enabled, and in general I just couldn't get it to work. Then, I came across a post on the Xiaomi.eu forums that ended up working for me very easily, and I'm writing it up here in case I need it again.

Enabling the profile

First, you should disable carrier checks for VoLTE and VoWiFi, just in case. You can do that by going to the dialer and entering the following number: *#*#86583#*#* (the numbers spell out "volte", which is easier to remember). Make sure the popup says "carrier check disabled", otherwise do it again until it does.

Then, do the same for *#*#869434#*#* (spells out "vowifi"), until that check is disabled too. Now you'll have the appropriate menus in the settings.

To actually load the profile, you need to enter the number *#*#663368378#*#* ("modemtest"). Then, go to "MBN config loading and activing tool" shown here:

screen1.png

Then press "Advanced":

screen2.png

Select mbn_eea.txt (if you're in Europe), and then press "validate".

screen3.png

Wait for it to finish, then you should be set. Restart the phone, enable Airplane mode, enable WiFi and make a call. If it works, you're done.


Last updated on July 23, 2022. For any questions/feedback, email me at hi@stavros.io.